LM058-1
Long Range Bluetooth Serial Adapter with external SMA connector.
-
Ideal Serial Cable Replacement Solution
-
Allows any device with a standard 9-pin serial port to communicate wirelessly
-
Bluetooth v2.0 + EDR compliant backward compatible with Bluetooth v1.2/1.1 specification
-
Class 1 Radio with 100 m range in open space
- Ideal Serial Cable Replacement Solution
- Allows any device with a standard 9-pin serial port to communicate wirelessly
- Bluetooth v2.0 + EDR compliant backward compatible with Bluetooth v1.2/1.1 specification
- Class 1 Radio with 100 m range in open space
- External SMA antenna connector
- Wide range of high gain antennas available to increase the range
- 2 DBi antenna provided by default. 5,7,9 DBi antennas also available
- Configuration Software available to configure settings on the adapter
- AT Command Set provided for module configuration
- LED indicators for Power, Data and Bluetooth Link
- Slide Switch to use the adapter as DTE or DCE device
- Reset Button Provided to restore factory settings
- Multiple Power Supply options - Pin 9 of DB9 connector, AC Mains via USB, Mini USB - USB
- Serial Port Profile (SPP) & Generic Access Profile (GAP) supported
- Firmware upgradable over USB
- Maximum Baudrate 230.4 kbps
- RTS/CTS flow control supported
- 802.11 Coexistence
- Lead free RoHS compliant
- Interoperable with PDAs, Phones, PCs and Laptops
- SPP firmware provided by default on the module
- Manufacturer LM Technologies Ltd
- Chipset CSR Bluecore 4 (BC04)
- Power Classification Class 1
- Adapter Type Serial Adapter
- Connector Type DB9 RS232 female, Mini USB
- Bluetooth Specification Core v2.0 + EDR backward compatible with Bluetooth v1.2/1.1 specification
- Frequency 2402 - 2480 MHz
- Temperature Range -20 to +75 °C
- Range 100 m - 600 m in open space (depending on antenna)
- Rx Sensitivity -83 dBm typical
- Antenna External SMA antenna
- Antenna Gain 2 dBi (default). 5,7,9 DBi antennas also available
- Power Supply 5V to 9V DC
- Current Consumption Max 140 mA
- Power Output +18 dBm Max
- Baud Rates 1.2/2.4/4.8/9.6/19.2/38.4/57.6/115.2/230.4 kbps
- RS232 Signals TxD, RxD, GND, CTS and RTS
- Default Firmware v4.53
- Size 35 mm x 65 mm x 16 mm
- Bluetooth Profile Serial Port Profile (SPP) and Generic Access Profile (GAP)
- Interface UART
- Tx Power Max 18 dBm (Class 1)
- Serial Parameters Default 19200, 8 N 1
- Configuration AT Command Set
- Flash Memory 8 MB
- RoHS Compliant Yes






